Want to rent it?
Do you want to know if renting makes more economical sense?
Call us and find out today.
|
Hitachi ZW330-6 Loader Exceptionally durable and reliable, the ZW330-6 is ideal for working in tough conditions. Designed and built using pioneering technology, it incorporates high quality and robust components that can withstand the challenges of busy job sites. Thanks to low levels of fuel consumption and greater traction force, the new ZW-6 wheel loader can deliver high levels of performance without compromising on efficiency. RELIABILITY
VERSATILITY
QUALITY
TECHNOLOGY
|
| Dimensions | |
|---|---|
| Length | 30’4”-30’6” |
| Width | 9’7” |
| Height | 11’7” |
| Weight | 57,915-58,158 lbs. |
| Wheelbase | 11’8” |
| Ground Clearance | 20” |
| Engine | |
|---|---|
| Engine Make | Cummins |
| Engine Model | QSL9 |
| Engine Type | Diesel engine, direct injection w/turbocharger and air cooled intercooler |
| Gross Horsepower | 311 HP |
| Net Horsepower | 302 HP |
| Cooling | Water-cooled Module type: Hydraulic-driven, suction-type fan, pressurized radiator |
| Bore x Stroke | 4.5” x 5.7” |
| Displacement | 543 in.³ |
| Gears | Reduction & differential: Spiral bevel gear, torque proportioning, single stage reduction Final Reduction: Inboard mounted, internal planetary gear |
| Air Cleaner | Dry type (double element) |
| Fuel Type | #2 Diesel (Requires ultra-low sulfur fuel) |
| Fuel Tank Capacity | 99.1 Gallons |
| Starter | DC 24V-10.5 HP |
| Battery | DC 12V-930 CCA (200 Ah), 2 units |
| Alternator | DC 24V-110A |
| Governor | All speed electrical type |
| Rated RPM | 1600 RPM |
| Aspiration | Turbocharger and intercooled |
| Cycles | 4 |
| Emission Standards | Complies with EU stage IV and US EPA Tier 4 Final |
| Torque Converter | Three element, single stage, single phase with lock-up clutch |
| After-Treatment | DOC and SCR system |
| Drivetrain | |
|---|---|
| Axles | Full-floating type |
| Transmission Type | Torque converter, countershaft type powershift with computer-controlled automatic shift and manual shift features included |
| Drive System | Four-wheel drive system |
| Brakes | Service: Inboard mounted fully hydraulic 4-wheel disc brake. Front and rear independent brake circuit Parking/Emergency: Spring-applied, hydraulically-released. Located in transmission. |
| Tires | 26.5R25 (L-3) |
| Hydraulic | |
|---|---|
| Pump | Electronically controlled, common rail type (Fuel Injection Pump) |
| Hydraulic System | Arm and bucket are controlled by multifunction lever Arm Controls: Four position valve; Raise, hold, lower, float Bucket controls with automatic bucket return-to-dig control Bucket controls: Three position valve: Roll back, hold, dump |
| Hydraulic Flow | Main Pump: 79 gal/min Fan Pump: Max flow-22.5 gal/min; Max Pressure-16.5 MPa |
| Hydraulic Cylinders | Lift (Boom): Two (2) double-acting piston type: 5.9” x 36.6” Tilt (Bucket): Two (2) double-acting piston type: 7.4” x 19.9” Steering: Two (2) double-acting piston type: 3.5” x 17.7” |
| Number of Cylinders | 6 |
| Hydraulic Cycle Time | Front end loading, Z bar linkage system Lifting time (at full load): 6.4 seconds (Normal Mode); 6.3 seconds (Power Mode) Lowering time (empty): 4.4 seconds Bucket Dumping Time: 1.2 Total: 12 seconds (Normal Mode); 11.9 seconds (Power Mode) |
| Relief Valve Setting | Loading: 4,554 PSI Steering: 3,974 PSI |
| Hydraulic Pump | Main Oil: 1000 PSI Pilot Oil: 3260 PSI |
| Operational | |
|---|---|
| Dig Depth | 4.1” |
| Bucket Capacity | 6.3-6.5 yd³ (heaped) 5.5-5.9 yd³ (struck) |
| Height to Bucket Pin | 14’10” (fully raised) |
| Dump Reach | 4’9”-4’11” |
| Steering | Articulated frame steering Mechanism: Hydraulic power steering unit, pilot operated type |
| Travel Speed - Forward | 1st: 4.0 MPH (Normal Mode); 4.2 MPH (Power Mode) 2nd: 7.0 MPH (Normal Mode & w/Lock-up clutch); 7.3 MPH (Power Mode & w/Lock-up clutch) 3rd: 13.6 MPH (Normal Mode & w/Lock-up clutch); 13.7 MPH (Power Mode & w/Lock-up clutch) 4th: 22.4 MPH |
| Travel Speed - Reverse | 1st: 4 MPH (Normal Mode); 4.2 MPH (Power Mode) 2nd: 7.0 MPH (Normal Mode & Power Mode); 7.3 MPH (Normal Mode w/Lock-up clutch & Power Mode w/Lock-up clutch) 3rd: 13.6 MPH (Normal Mode & w/Lock-up clutch); 13.7 MPH (Power Mode & w/Lock-up clutch) 4th: 22.4 MPH |
| Max. Reach | 4’9” (45 degree dump, full height) |
| Breakout Force | 40,241-42,430 lbs. |
| Oscillation | Angle: Total 24 (+12,-12)° |
| Rollback Angle | 45 degrees |
| Dump Clearance | 10’3”-10’5” |
| Hinge Pin Height | 14’10” |
| Clearance Circle | 24’9” (outside of bucket) 21’1” (outside of tire) |
| Bucket Tilt | 41 deg (at ground position) |
| Static Tipping Load | 44,571-45,085 (Straight) 38,890-39,330 (Full turn) |
ENGINE
POWERTRAIN
HYDRAULIC SYSTEM
ELECTRICAL
CAB
OTHERS
ALARMS, GAUGES, INDICATORS
Gauges
Indicators
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.
New Equipment Sales only available in assigned territories where Kirby-Smith Machinery, Inc. is a licensed distributor. Not all manufacturer's brands available at each location. Please contact your local Kirby-Smith branch if you have questions regarding availability.
| Main Technical Specifications | |
|---|---|
| MAKE | Hitachi |
| MODEL | ZW330-6 |
Do you want to know if renting makes more economical sense?
Call us and find out today.
