NPK M28G-Pulverizing

NPK M28G-Pulverizing

New NPK M28G-Pulverizing Material Processor for Sale

Material Processor - Jaw Set

On-site versatility is optimized by the availability of interchangeable jaws.

NPK's Material Processors are an efficient solution for concrete, steel and rebar processing, building and bridge demolition, and recycling.

  • Maximum productivity. Interchangeable jaws provide superior results in demolition, concrete processing and scrap recycling.
  • Cost effective. Far more economical than buying four different attachments for four different applications.
  • Rugged design for extended life. Manufactured from high-strength, abrasion-resistant steel; reinforced shield protects cylinder rods.
  • Full 360° power rotation. Provides an effective angle of attack for any job wherever the location.
  • Reduced transportation costs. On-the-job processing reduces material volume, which cuts down the number of trips required to haul material away.
  • The NPK advantage in parts and service. Over 280 NPK distributor outlets are professionally staffed and conveniently located to serve your needs. Just one of the many reasons that have made NPK the leader in boom-mounted attachments.
  • Cylinder design improves crushing / piercing power to handle the toughest jobs. Exclusive integral hydraulic intensifier system boosts power by reducing cycle time, while improving productivity and providing greater power-to-weight ratio.
Dimensions
Weight Unit: 6,850 lbs. (3,107 kg)
Excavator Weight: 25 - 40 US tons (23 - 36 metric tons)
Opening Maximum Jaw: 35.7 in. (908 mm)
Cycle Time (seconds): 3.1 close / 1.7 open
Hydraulic
Operating Pressure 3,625 psi (250 bar)
Maximum Crushing / Pierce Force: 125 US tons @ tip (114 metric tons @ tip)
Operational
Flow Oil Flow: 50 - 80 gpm (190 - 300 lpm)

*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.

*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.

New Equipment Sales only available in assigned territories where Kirby-Smith Machinery, Inc. is a licensed distributor. Not all manufacturer's brands available at each location. Please contact your local Kirby-Smith branch if you have questions regarding availability.

View Brochure

Main Technical Specifications
MAKE NPK
MODEL M28G-Pulverizing

Want to rent it?

Do you want to know if renting makes more economical sense?
Call us and find out today.

NPK M28G-Pulverizing

print
6715 W. Reno
Oklahoma City, OK 73127 Phone: 888.861.0219
www.kirby-smith.com
CUSTOMER
DATE
PRICE
SALESPERSON

New NPK M28G-Pulverizing Material Processor for Sale

Material Processor - Jaw Set

On-site versatility is optimized by the availability of interchangeable jaws.

NPK's Material Processors are an efficient solution for concrete, steel and rebar processing, building and bridge demolition, and recycling.

  • Maximum productivity. Interchangeable jaws provide superior results in demolition, concrete processing and scrap recycling.
  • Cost effective. Far more economical than buying four different attachments for four different applications.
  • Rugged design for extended life. Manufactured from high-strength, abrasion-resistant steel; reinforced shield protects cylinder rods.
  • Full 360° power rotation. Provides an effective angle of attack for any job wherever the location.
  • Reduced transportation costs. On-the-job processing reduces material volume, which cuts down the number of trips required to haul material away.
  • The NPK advantage in parts and service. Over 280 NPK distributor outlets are professionally staffed and conveniently located to serve your needs. Just one of the many reasons that have made NPK the leader in boom-mounted attachments.
  • Cylinder design improves crushing / piercing power to handle the toughest jobs. Exclusive integral hydraulic intensifier system boosts power by reducing cycle time, while improving productivity and providing greater power-to-weight ratio.
GENERAL INFORMATION
Manufacturer
NPK
Model Year
Model
M28G-Pulverizing
Condition
NEW
Dimensions
Weight
Unit: 6,850 lbs. (3,107 kg) Excavator Weight: 25 - 40 US tons (23 - 36 metric tons)
Opening
Maximum Jaw: 35.7 in. (908 mm) Cycle Time (seconds): 3.1 close / 1.7 open
Hydraulic
Operating Pressure
3,625 psi (250 bar) Maximum Crushing / Pierce Force: 125 US tons @ tip (114 metric tons @ tip)
Operational
Flow
Oil Flow: 50 - 80 gpm (190 - 300 lpm)

Legal Notice: Manufacturer Name, Logo and Model Information are Registered Trademarks of the Manufacturer.
Specifications and other information are subject to change without notice. No representation of accuracy is made.
Image is believed to be in the public domain or used with permission.
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.

New Equipment Sales only available in assigned territories where Kirby-Smith Machinery, Inc. is a licensed distributor. Not all manufacturer's brands available at each location. Please contact your local Kirby-Smith branch if you have questions regarding availability.
LOCATIONS
CAREERS
CONTACT