Wirtgen W 130 Fi

New Compact Milling Machine for Sale

New Wirtgen W 130 Fi Compact Milling Machine for Sale

The highly flexible compact milling machines combine the advantages of the small and large milling machine classes. The maneuverable front-loaders are easy to transport and are ideal for use on confined job sites. These powerful machines can mill off entire asphalt pavements cost-effectively. A wide range of different milling drums is available, greatly extending the possible range of applications so that the milling of individual layers and fine milling operations are also among the everyday tasks of these machines.

  • The front loader in the one-meter class is characterized by its outstanding performance and flexibility at working widths of 4 ft 3 in.
  • Compact dimensions and optimized machine weight make it ideal for a wide range of applications – also on sites with limited space, such as in city centers.
  • The variety of tool spacings and working widths offered by FCS milling drums further expands the range of possible applications.
  • The cutting-edge leveling system LEVEL PRO ACTIVE, the intuitive operating concept and further digital assistance systems enable efficient handling and precise milling results with only one operator.
  • The innovative MILL ASSIST machine control system ideally combines sustainable and efficient machine operation with high productivity.
Dimensions
Length 34’11”
Width 9’1”
Height 15’7”
Weight 47,179 lbs.
Engine
Engine Make John Deere
Engine Model 6090HD-S5-PVR
Cylinders 6
Horsepower 355 HP
Cooling Water
Displacement 549 in³
Fuel Consumption 16.6 GPH at rated power
6.6 GPH during a mixture of job site operations
Fuel Tank Capacity 161.1 Gallons
Water Tank Capacity 422.7 Gallons
Emission Standards EU Stage 5/US EPA Tier 4f
Rated Power 349 HP at 2100 RPM
Track Chains 4'6" x 10" x 23" (front/back)
Drivetrain
Tires 2’2” x 11” (front/rear)
Speeds 0 to 2.2 MPH (max. milling speed)
0 to 4.7 MPH (max. speed on wheels & tracks)
Hydraulic
Hydraulic Tank Capacity 30.4 Gallons
Operational
Cutting Width 4’3”
Cutting Depth 13”
Cutting Diameter 3’3”
Conveyor Belt Width 2’2” (primary)
2’ (discharge)
Electrical
Power Supply 24 V
  • Exhaust emissions category: EU Stage 5/US EPA Tier 4f
  • Operating Weight: 47,179 lbs.
  • Milling width: 4’3”
  • Milling Depth: 13”
  • Displacement: 549 in³
  • Max. Travel Speed in Tracked Design: 4.7 MPH
  • Max. Milling Speed: 197 fpm
  • Max. Power: 355 HP

 

Standard Equipment

  • Basic Machine
    • Base machine with engine
    • Electrohydraulically opening engine cowling
    • Radiator with temperature-dependent fan speed
    • Highly effective noise insulation throughout the engine compartment
    • Automatic engine speed adjustment depending on machine load
    • Elastically mounted engine station with low vibration and low noise
  • Milling Drum Unit
    • The right-hand side of the milling drum housing can be easily opened for maintenance or drum change
    • Hydraulically operated rear scraper with mechanical locking
  • Loading of the Milled Material
    • Discharge conveyor slewing angle left 65 degrees – right 65 degrees
    • Hydraulically foldable discharge conveyor with two swing speeds, including adjustable conveyor speed for precise loading
  • Machine Control and Leveling System
    • Digital milling depth indicator on machine control panel
    • LEVEL PRO ACTIVE leveling system right and left
    • RAPID SLOPE cross-slope sensor for LEVEL PRO ACTIVE leveling system
    • Precise machine height adjustment in increments of 1 or 5 mm via the machine’s main control panel
    • Advance drive with electronic traction control system
    • Automatic water management
  • Operator’s Platform
    • Hydraulically extendable operator’s platform for optimum view of the working area
    • Steering console adjustable in inclination which enables the operator’s platform to be ideally adjusted to suit the operator
    • Slender machine design permits unobstructed view of the milled edge as well as the working area in front of the milling drum on the right
    • Conveniently accessible ladder/footstep to the operator’s platform with night-time lighting and especially low bottom edge of the latter/footstep
    • Robust anti-vandalism protection for the controls
    • Mirror package including front left and right rear-view mirrors, a forward-facing mirror to the left of the operator’s platform, and a mirror for the area in front of the left front crawler unit
    • Reversing horn with clearly audible signal
    • Illuminated control panel/nighttime design
    • Scraper height indicator on control panel
  • Track Unit and Height Adjustment
    • Dual-speed hydraulic height adjustment of front and rear track units
    • ISC-intelligent track speed control including hydraulic four-track drive
    • Reversing with the milling drum rotating.  Simple and fast maneuvering
    • Equipped with extremely wear-resistant 2-piece polyurethane track pads
  • Miscellaneous
    • Large tool package
    • Towing device
    • Generously sized water and diesel tanks
    • Comprehensive safety package with several EMERGENCY STOP switches
    • “Welcome-and-Go-Home-Light” feature including LED lighting in the area of the operator’s platform and access
    • Hydraulically driven water filler pump used to fill the water tank with a suction hose, maximum flow-through quantity of 55.5 gal/min (210 l/m)
    • European type certification, EuroTest mark and CE conformity

 

 

Standard Equipment, can be replaced with optional if desired

  • Milling Drum Unit
    • Milling drum housing FB1300 (4’3”) Premium
  • Milling Drums
    • Milling drum FB1300 (4’3”) HT22 PLUS LA15 with 115 picks
  • Loading of the Milled Material
    • Machine with hydraulic pre-fitting for a discharge conveyor – screw coupling
    • Discharge conveyor, 26’9” (8,150 mm) long, 2’ (600 mm) wide, with hydraulic folding device
  • Operator’s Platform
    • Premium operator’s platform, hydraulically moveable
  • Track Unit and Height Adjustment
    • 4 driven track units
  • Miscellaneous
    • Standard film coating in RAL 9001 (cream)
    • WITOS – professional telematics solution for machine operation and service optimization
    • Standard LED lighting package with 14,050 lumen
    • Standard electro-hydraulic unit
  • Milling Drum Unit
    • Milling drum housing FB1300 (4 ft 3 in) FCS
    • Overload sensor on the scraper
    • Active floating position for the side plates, left and right
    • Wear-protection rollers for right side plate
    • Sectional, electrically switchable water spray bar
    • Hydraulic material scraper
  • Milling Drums
    • Milling drum FB1300 (4 ft 3 in) HT22 PLUS LA18 with 105 picks
    • FCS milling drum FB1300 (4 ft 3 in) HT22 PLUS LA15 with 115 picks
    • FCS milling drum FB1300 (4 ft 3 in) HT22 PLUS LA18 with 105 picks
    • FCS milling drum FB1300 (4 ft 3 in) HT22 PLUS LA8 with 185 picks
    • FCS milling drum FB1300 (4 ft 3 in) HT5 LA6X2 with 444 picks
    • FCS milling drum FB1300 (4 ft 3 in) HT22 PLUS LA25 with 91 picks
    • FCS milling unit FB300 (12 in) HT22 PLUS LA12 with 61 picks
    • FCS milling unit FB500 (20 in) HT22 PLUS LA15 with 72 picks
    • FCS milling unit FB600 (2 ft) HT22 PLUS LA12 with 79 picks
    • FCS milling unit FB900 (2 ft 11 in) HT22 PLUS LA15 with 102 picks
    • FCS tandem scraper
    • Milling drum assembly trolley to FB1300 (4 ft 3 in)
    • Assembly kit for moving the FCS milling drum
    • Hydraulically driven pick extractor drift
    • Milling drum rotation device
    • Pneumatic hammer with pick extractor/inserter
  • Loading Of The Milled Material
    • Machine with hydraulic pre-fitting for a discharge conveyor – quick-change coupling
    • Shortened discharge conveyor, 21 ft 4 in (6,500 mm) long, 2 ft (600 mm) wide, with hydraulic folding device
    • Signal lights for visual “stop” and “go” instructions for the truck driver
    • VCS extraction system
    • Active Conveyor swing angle control for discharge conveyor
  • Machine Control and Leveling System
    • Leveling boom including sensor for LEVEL PRO ACTIVE leveling system
    • Extension of LEVEL PRO ACTIVE with two leveling booms and one Sonic-Ski sensor
    • Multiplex pre-equipment consisting of 2 sensor sockets
    • 3-way multiplex system, right, including 2 ultrasonic sensors
    • 3-way multiplex system, right and left, including 4 ultrasonic sensors
    • Level control 3D leveling pre-equipment
    • Extension of LEVEL PRO ACTIVE with a linear laser sensor
  • Operator’s Platform
    • Operator’s platform with air-conditioned comfort cabin
    • Operator’s platform equipped with weather protection elements on the sides
    • Operator’s platform with weather canopy and lateral weather protection elements
    • Operator’s platform heater
  • Track Unit and Height Adjustment
    • 4 driven wheeled chassis
  • Miscellaneous
    • Film coating according to the customer’s wishes
    • WIRTGEN GROUP PERFORMANCE TRACKER – Precise measurement of milling performance
    • Model without WITOS
    • Extended LED lighting package with 27,200 lumen
    • Premium electro-hydraulic unit
    • Additional weight 1,036 lbs. (470 kg)
    • Air compressor system
    • Electrical fuel filter preheating
    • Powerful high-pressure water cleaner, 2,176 psi (150 bar), 4 gal/min (15 l/min)
    • User-specific storage of machine settings via SMART KEY key fob
    • MILL ASSIST assistance system
    • Monitor system with 2 cameras and a 7” control panel
    • Monitor system with 5 cameras and a 10” control panel
    • Expanded lighting equipment
    • License plate holder with LED lighting

All machines are not available at all locations.

View Brochure

Main Technical Specifications
MAKE Wirtgen
MODEL W 130 Fi

Why rent when you can own?

Call us to see if ownership makes economical sense for you and your organization.

Wirtgen W 130 Fi

print
6715 W. Reno
Oklahoma City, OK 73127 Phone: 888.861.0219
www.kirby-smith.com
CUSTOMER
DATE
PRICE
SALESPERSON

New Wirtgen W 130 Fi Compact Milling Machine for Sale

The highly flexible compact milling machines combine the advantages of the small and large milling machine classes. The maneuverable front-loaders are easy to transport and are ideal for use on confined job sites. These powerful machines can mill off entire asphalt pavements cost-effectively. A wide range of different milling drums is available, greatly extending the possible range of applications so that the milling of individual layers and fine milling operations are also among the everyday tasks of these machines.

  • The front loader in the one-meter class is characterized by its outstanding performance and flexibility at working widths of 4 ft 3 in.
  • Compact dimensions and optimized machine weight make it ideal for a wide range of applications – also on sites with limited space, such as in city centers.
  • The variety of tool spacings and working widths offered by FCS milling drums further expands the range of possible applications.
  • The cutting-edge leveling system LEVEL PRO ACTIVE, the intuitive operating concept and further digital assistance systems enable efficient handling and precise milling results with only one operator.
  • The innovative MILL ASSIST machine control system ideally combines sustainable and efficient machine operation with high productivity.
GENERAL INFORMATION
Manufacturer
Wirtgen
Model Year
Model
W 130 Fi
Condition
NEW
Dimensions
Length
34’11”
Width
9’1”
Height
15’7”
Weight
47,179 lbs.
Engine
Engine Make
John Deere
Engine Model
6090HD-S5-PVR
Cylinders
6
Horsepower
355 HP
Cooling
Water
Displacement
549 in³
Fuel Consumption
16.6 GPH at rated power 6.6 GPH during a mixture of job site operations
Fuel Tank Capacity
161.1 Gallons
Water Tank Capacity
422.7 Gallons
Emission Standards
EU Stage 5/US EPA Tier 4f
Rated Power
349 HP at 2100 RPM
Track Chains
4'6" x 10" x 23" (front/back)
Drivetrain
Tires
2’2” x 11” (front/rear)
Speeds
0 to 2.2 MPH (max. milling speed) 0 to 4.7 MPH (max. speed on wheels & tracks)
Hydraulic
Hydraulic Tank Capacity
30.4 Gallons
Operational
Cutting Width
4’3”
Cutting Depth
13”
Cutting Diameter
3’3”
Conveyor Belt Width
2’2” (primary) 2’ (discharge)
Electrical
Power Supply
24 V

Legal Notice: Manufacturer Name, Logo and Model Information are Registered Trademarks of the Manufacturer.
Specifications and other information are subject to change without notice. No representation of accuracy is made.
Image is believed to be in the public domain or used with permission.
All machines are not available at all locations.
LOCATIONS
CAREERS
CONTACT