New Kleemann MR 110i EVO2 Mobile Impact Crusher for Sale

The mobile impact crushers MOBIREX are used in soft to medium-hard natural rock and in recycling. The capacity of the plants is enormous - and the focus is not only on pure volume reduction. Cost and environmental awareness, availability, versatility and, above all, the quality of the final product are important aspects. With the MOBIREX plants stone is crushed so that the grain shape, grain size distribution, and cleanliness meet the high requirements of the standards for concrete and asphalt aggregates.

The mobile impact crusher MOBIREX MR 110i EVO2 can be universally deployed and produces first-class final grain quality. With a crusher inlet of 1100 mm and numerous technical highlights, a formidable production rate can be achieved with the best cost effectiveness. Thanks to its compact design, the machine is easy to transport and can be assembled and disassembled quickly.

Highlights

• Optimized Material Flow
  • Each sectional component is wider than the last to allow material an unrestricted flow
  • No narrowing of the material flow
  • Higher performance with less fuel consumption
  • Improved life time due to reduced wear
  • No more material bridging
• Feeding Unit
  • Hydraulically operated hopper folding and locking system, for shortest set-up times and operation safety
  • Can be operated from the ground
  • Additionally secured with mechanical locking elements (also for hopper extension)
  • High wear-resistance due to side walls made of wear resistant steel
  • Optional hopper extension
• Primary Screening
  • Independent vibrating double-deck pre screen ensures effective screening of fines for optimal final grain quality
  • Reduction of wear in the crusher area by diverting the medium grain directly to the discharge chute
  • Simple and safe replacement of screen mesh in upper and lower deck
  • Reduction of bridging due to levelling of the feed material before the crusher
  • Side discharge conveyor can be fitted either on the left or right
  • Comfortable discharge height of side discharge conveyor avoids damage by wheel loader
• Continuous Feed System (CFS)
  • Continuous crusher feed through the intelligent feed control CFS:
    • Sensors measure the load on toggle and rotor
    • Depending on the load, feeding chute and pre-screening frequencies are adapted automatically
    • When the load in the crushing chamber is  rebalanced, feeding continues without delay
  • The plant is quickly back at full performance
  • Less load on the downstream components reduces wear
  • Percentage of oversize grain is minimised
• Crusher Unit
  • Optimized inlet geometry for improved entry of the material, thus increased throughput
  • Reduced bridging in the crusher inlet by means of a hydraulic raising crusher inlet cover and upper impact toggle (controlled by radio remote control)
  • Increased product quality due to C-shape rotor ledges for better impact effects over a longer period
  • Fully hydraulic crusher gap adjustment via touch panel - also possible when rotor is running
  • Effective overload protection with automated reset of gap setting of the impact toggles by sensor controlled hydraulic cylinder
• Safety System
  • Lock & Turn system for the safe and comfortable operation of the plant when changing rotor ledges, as well as when eliminating material clogging
  • The key transfer safety system permits working only at certain areas of the crusher, while other areas are blocked
  • Connectible lock & turn device: Turn and block the rotor manually from the outside – with maximum safety
  • Innovative rotor ledge clamping system enables simple and quick rotor ledge change
• Drive
  • Extremely efficient and high-performance diesel direct drive for lowest fuel consumption per ton end product
  • Electric drives of chutes, screens and conveyors – low consumption, no risk of hydraulic leaks
  • High operational reliability thanks to fluid coupling
  • Excellent service accessibility to all key components
• Control System
  • Simple operation via touch panel with menu-guided user interface SPECTIVE
  • All components and functions can be controlled from the ground
  • Status display of all components such as speed, temperature, pressure etc.
  • Fast error-tracking, display in full text format
  • Protection of control unit by anti-vibration control cabinet with dust protection
  • Additional flap in control cabinet provides easy access to control panel
  • Radio remote control for controlling all key components such as vibrating conveyor, pre screen, crusher inlet cover, impact toggle, return conveyor and magnet
• Final Screening Unit and Magnetic Separator
  • Final screening unit (optional):
    • Single-deck vibrating screen with extra large screening surface for effective screening, also for gradations smaller than 30 mm
    • Return conveyor can be swivelled out up to 100° for side discharge
    • Hopper integrated slide for oversize grain allows for high operational safety even with inhomogeneous material
  • Magnetic separator (optional):
    •  High-performance permanent or electro (option) magnet for maximum output
    • Raise and lower the magnet parallel to the main conveyor; operation via remote control
• Transportability
  • Increased ground clearance below final screening unit and thus better transportability with different low-bed loaders
  • Simple dismounting of the final screening unit and simplified transport thanks to compact container dimensions
  • Final screening unit located on skids for fast loading by hook-lift system
  • Transport-friendly weight