Want to rent it?
Do you want to know if renting makes more economical sense?
Call us and find out today.
|
New Broderson ICe-80 Carry Deck Crane for Sale Broderson Carry Deck Cranes are highly versatile, ideal for lifting material that requires a compact, low-profile crane to maneuver in tight spaces and clear overhead obstacles. Multiple sizes and capacities, including optional customization equipment, ensure your Broderson crane can fulfill all your lifting needs. The ICe-80 is a battery electric powered industrial carry deck crane designed for heavy lifting in constrained environments, where zero-emissions is required or preferred. The ICe-80 is designed with performance in mind and can keep pace with the speed and hydraulic capabilities that the ICe-80 is known for.
|
| Specs | |
|---|---|
| Telematics | Yes |
| Body | |
|---|---|
| Chassis | Cargo Deck: 53 square feet (5 m2) of deck area. A maximum of 14,000 lb. (6,350 kg) capacity on deck when load is centered over or between axles. A storage box is located in front cargo deck. Steps located on front corners. Heavy deck loads allowed at creep speed below 2 MPH (3.2 km/h) and less than 200 feet (61 m) in 30 minutes. |
| Cab | All-Weather Cab: Rigid-mounted canopy section & removable hinged door. Includes heater, electric windshield wiper, one sliding glass window in the door & one in the right side of canopy. Defroster fan & dome light included. Windshield Washer: Includes reservoir pump and nozzle. Floor Mat: Vinyl mat with foam backing. Operator Suspension Seat: Provides additional operator comfort. Noise Reduction Kit: Includes floor mat, control valve and side panels of foam backed vinyl for noise reduction. |
| Heater/Defroster/Air Conditioning | Cab Heater: Heater with two-speed fan for units without Air Conditioning: Air Conditioner with R134 coolant |
| Lifting Rings | Lifting rings at each corner of cargo deck so sling can be attached for lifting crane. |
| Operator Compartment | Operator’s Control Station provides one-position access to all operating functions. Includes adjustable operator’s seat, retracting seat belt, fire extinguisher and bubble level. |
| Dimensions | |
|---|---|
| Length | 12’10” |
| Width | 6’6” |
| Height | 7’3” |
| Weight | 16,400 lbs. (2 wheel drive) |
| Turning Radius | C/L of outside steering wheel: 11’2” Aisle Width for 90° Turn: 9’7” |
| Capacity | 18,000 lbs. |
| Horizontal Reach | 40’ w/boom extension |
| Sheave Height | 46’8” |
| Sheave Block | Single sheave block for 2-part line requirements. |
| Engine | |
|---|---|
| Engine Type | 73 kW Permanent Magnet Synchronous Motor |
| Cooling | Liquid Cooling system |
| Max Travel Speed | Infinitely variable speed control up to 17 MPH max speed on flat surface |
| Fuel Type | Electric |
| Rated Capacity | Yes Warns operator of impending overload with audible and visual signals. Prevents overload by stopping boom functions that cause overloads. |
| Drivetrain | |
|---|---|
| Axles | Planetary drive/steer axle with 11.625 : 1 axle ratio. Differential is “No-Spin.” Axle mounted rigidly to frame. 1-1/2° oscillation in either direction. 2-Wheel Drive: Axle with 1-1/2° oscillation in either direction |
| Hydraulic | |
|---|---|
| Hydraulic System | 50kW Permanent Magnet Synchronous Motor and inverter drive. Both motor and inverter have liquid cooling system. Silent Plus series tandem hydraulic pump rated at 16 and 32 GPM at rated RPM (61 L/min and 121 L/min). Hydraulic oil tank capacity of 25 gallons (95 L) |
| Auxiliary Winch | Mounted behind front bumper, hydraulically driven with controls. |
| Operational | |
|---|---|
| Brakes | Four-wheel hydraulic. Wet disc brakes are on the front and rear axles Parking brake is disc type |
| Tires | 2-Wheel Drive: 10.00 x 15, 16-ply rating, Highway Type Tread Mining & Industrial: 10 x 15, 193 lbs. Mining & Industrial Non-Marking: 10 x 15, 193 lbs. Solid Rubber Tires: 8.25 x 15 Foam Filled Tires: All four 900 lbs. Spare Tire & Wheel: Mounted |
| Steering | Rear Wheel – 4 Wheel – Crab Hydraulic steering unit with cylinders attached to each axle. Rear axle is the primary steer. An electric switch in the operator’s compartment is used to select rear-wheel steering, four-wheel round steering or crab steering. Electronic sensors and control box automatically align the steering when a new mode is selected |
| Outriggers | Independently Controlled Hydraulic Four hydraulic outriggers of box beam construction. Independent controls for each outrigger. Each cylinder equipped with direct-connected holding valves. |
| Drum Rotation | DRUM ROTATION INDICATOR: Provides tactile feedback to operator when hoist drum is rotating. |
| Pintle Hook | Rear & Front |
| Outrigger Pad Dimension | 9” x 12” |
| Boom | |
|---|---|
| Boom | 30’ |
| Boom Extensions | 2 wheel drive: 14’6” 10’ Boom stowable 10ft. (3m), Offsettable. Same as above item, except boom extension is offsettable to 3 different positions; 0° (inline), 15° and 30° offset |
| Max Tip Height-Boom | 46’8” w/Boom Extension |
| Boom Rotation | 360° Continuous Heavy-duty ball bearing rotation gear with external teeth. Rotation is powered by hydraulic motor and worm gear drive. |
| Boom Elevation | 0° to 70° |
| Boom Hoist | Turret mounted planetary gear hoist hydraulically powered with a bare-drum line pull of 10,000 lbs (4,536 kg) at a speed of 110 FPM (34 m/min). Includes down-haul weight, swivel hook & sheave block for 2-part line and 125 ft (38 m) of 9/16” (14 mm) hoist rope. |
| Boom Sections | 3 |
| Boom Assembly | THREE-SECTION BOOM ASSEMBLY equipped with bearing pads, double-acting hydraulic cylinders with direct-connected holding valves & boom angle indicator on driver’s side of boom. |
| Electrical | |
|---|---|
| Battery | 700 VDC Lithium ion battery pack. Battery pack features internal recirculated air cooling system and an independent battery management system. Battery capacity sized for 8 hour day crane operating duty cycle. Dual voltage battery charging system 8 hour charge time at 120VAC / 4 hour charge time at 240VAC. |
| Electrical System | LED MACHINE INTERFACE: Includes battery status indicator showing % charge, voltage and temperature. Drive motor status and drive direction and speed. Hydraulic Motor status and speed. Controls for optional heater and air conditioning. System diagnostics and fault codes. Battery charging status. BACK-UP ALARM: Provides pulsating sound from 97 dB alarm when transmission is in reverse. Conforms to SAE J994b. OUTRIGGER ALARM SYSTEM: Two-tone alarm is activated when “outrigger down” controls are operated. |
| Lighting | Headlights with Hi and Low beams, back-up lights, integral tail, brake, front and rear turn signals and emergency flasher switch at operator’s station. 12V horn actuated by button on shifting control. Strobe Lights: Yellow strobe light mounted on each side of turret weight box. Boom Work Lights: One work light mounted to boom to light boom tip and one work light mounted to turret to light ground under boom tip. Work Lights-Rear: Two work lights recessed in rear bumper. RCL Light Bar: 3 color light bar for external indication of load status |
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.
New Equipment Sales only available in assigned territories where Kirby-Smith Machinery, Inc. is a licensed distributor. Not all manufacturer's brands available at each location. Please contact your local Kirby-Smith branch if you have questions regarding availability.
| Main Technical Specifications | |
|---|---|
| MAKE | Broderson |
| MODEL | ICe-80 |
Do you want to know if renting makes more economical sense?
Call us and find out today.
