• Bolt-on discharge port allows easy replacement
• Cast aluminum housing for light weight
• Electric motor — water is discharged around the casing for cool operation
• Safety First — Selected models are UL listed for the US and Canada.
• Urethane-covered cast iron volute and an allurethane impeller withstand tough dewatering projects
• Strain relief cord protection
• Thermal overload protection prevents motor damage
• Compact, streamlined design
• Cast iron/steel motor casing serves as heat conductor
• Oil-filled dual seal provides lubrication when running dry
• Rugged strainer and stainless steel hardware provide long service life

• Float Switch ~ SW1A: Mechanically activated, wide-angle design single ON/OFF float switch that is not sensitive to rotation or turbulence.  A 120V “piggy-back” plug provides convenient operational set-up. For all Multiquip submersible single phase, 115V Pumps, and other comparable pump models.
  • SW1A Features
    • 120/230V 50/60Hz Single Phase
    • Rated for 13A running and 85A start-up.
    • Adjustable activation range 6” to 18”.
    • High impact PVC, corrosion resistant float housing.
    • Operates up to 140° F.
    • Heavy duty electrical contacts.
    • UL/CSA Certified.
    • Passed NSF Standard 61 Protocol.
    • 16 gauge, 2-conductor water resistant cable - 20’ cord length.
    • Includes standard mounting cable & pipe clamps.
• Control Box ~ CB3: 120V 50/60 Hz Single Phase Controller w/two mechanically activated wide angle ON/OFF float switches (SW1WOPA). This box is selected if the operations call for a manual ON/OFF/AUTO Switch. Housing manufactured from polyester reinforced fiberglass, water resistant, UL/CSA Certified. Use with any 115V or 120V model submersible pump. For all Multiquip submersible single phase, 115V Pumps, and other comparable pump models.
• Double Float Switch ~ SW2A: Consists of two mechanically activated wide-angle ON/OFF float switches and a splice tube. The slice tube contains a Holding Relay which enables the floats to function in series. It is well suited for confined applications requiring an accurate pumping range. A Holding Relay eliminates pump chatter in turbulent water conditions. (Deactivation point @ 4” below mounting – Activation point @ 4” above mounting).
  • SW2A Features
    • 120/230V 50/60Hz Single Phase
    • Rated for 13A running and 78A start-up.
    • Adjustable activation range 2” to 48”.
    • High impact PP, corrosion resistant float housing.
    • Operates up to 140° F.
    • Heavy duty electrical contacts.
    • UL/CSA Certified.
    • Passed NSF Standard 61 Protocol.
    • Cable attached to Float Housings: 16 gauge, 2-conductor water resistant
    • Cable above Splice: 14 gauge 3 conductor w/‘piggy-back’ 120V plug w/20’ cord Length.
    • Includes standard mounting cable & pipe clamps.
• Discharge Hose – NPT Thread
  • HD250 - (50’ L 2” Diameter)
• Discharge Hose – Quick Disconnect Couplers
  • HDQ250 - (50’ L 2” Diameter)

*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.