|
New Wirtgen SP 25i Offset Slipform Paver for Sale
With offset slipform pavers, the concrete is transported into the offset mold via a loading conveyor or a conveyor auger. The offset mold can be mounted on the left or right-hand side of the machine. A number of molds in a wide range of different shapes and sizes are available for individual applications. The offset profiles are continually produced monolithically, with or without reinforcements. Machine features include a top-quality machine control system, a practical steering and drive system and stringline-free concrete paving.
- The multifunctional slipform paver paves a wide range of monolithic profiles up to 6 ft 7 in thick.
- It can be used to easily pave concrete surfaces up to a paving width of 12 ft using both the inset and offset methods (cannot be combined with all options).
- One or two hydraulic parallelogram swing arms at the front and two hydraulically telescoping crawler units at the rear make it possible to pave concrete in an extremely flexible manner.
- The intelligent, electronic steering and control concept means the machine can be driven through very tight turning angles and is highly adaptable to any job site situation.
- The machine can be precisely controlled via stringline scanning, without a stringline using WIRTGEN AutoPilot 2.0, or via 3D applications.
|
|
| Length |
25’11”
Track: 5’2” |
| Width |
8’2”
Track: 11.8” |
| Height |
10’2”
Track: 21.3” |
| Weight |
29,982 lbs. |
| Tracks |
3 (standard), 2 rear, 1 front
5 ft. 2 in. x 12 in. x 21 in. (1,580 x 300 x 540 mm) |
| Height Adjustment |
4’1” (hydraulic)
22” (mechanical) |
| Crawler Track |
4 |
| Engine Type |
US EPA Tier 4f |
| Fuel Tank Capacity |
99.1 Gallons |
| Engine Make |
Deutz |
| Engine Model |
TCD 4.1 L4 |
| Cylinders |
4 |
| Horsepower |
154 HP |
| Cooling |
Water |
| Displacement |
246.5 c.i. |
| Fuel Consumption |
8 gal/h |
| Speeds |
0 to 49.2 ft/min |
| Hydraulic Capacity |
35.7 Gallons |
| Hydraulic Vibration |
5 or 10 connectors |
| Paving Speed |
0 - 50 fpm (0 - 15 m/min.) |
| Travel Speed - Forward |
0 to 114.8 ft/min |
| Belt Length |
16'1"
19'4" (long option)
19'8" (folding option) |
| Belt Conveyor Width |
2' |
| Area of Application |
Offset/Inset |
| Auger Conveyor |
Length: 15'1" (optional); 18'8" (optional long)
Diameter: 15.7" (option) |
| Paving Position |
Left/Right |
| Position Units |
Track: 1 x additional front |
| Electric Vibration |
5 or 10 connectors |
| Power Supply |
24 V |
| Tracked or Wheeled |
Tracked |
| Paving Width |
12’ |
| Paving Depth |
6’7” |
- Exhaust emissions category: EU Stage 5/US EPA Tier 4f
- Number of crawler tracks: 4
- Operating weight, CE: 29,982 lbs
- Displacement: 246 in³
- Height adjustment, hydraulic: 4 ft 1 in
- Max. working speed: 0 – 50 ft / min
- Max. travel speed: 0 – 115 ft / min
- Max. mold width: 12 ft
- Max. mold height: 6 ft 7 in
- Height adjustment, mechanical: 1 ft 10 in
- Rated power: 115 kW / 154 hp
- Lateral adjustment of mold: 4 ft 7 in
Standard Equipment
- Basic Machine
- 99 gal fuel tank
- 66 gal hydraulic oil tank
- Electrical system (24 V)
- Hydraulic pump system
- Pressure-and-flow-controlled hydraulic pump, open circuit, for driving the hydraulic or electric vibrators or for driving the track units in second gear
- Pressure-controlled hydraulic pump, open circuit, for all cylinder functions
- Proportionally controlled hydraulic pump, closed circuit, for driving the auger conveyor or belt conveyor
- Main Frame and Height Adjustment
- Sturdy machine frame for accommodating two track units at the rear and one or two track units at the front
- Telescoping in length by 2 ft 3 in to adjust the machine to site conditions or to allow mounting of a trimmer
- Telescoping in width by 2 ft 4 in hydraulically at the rear by extending one or both rear track units to either improve machine stability in offset application when paving specific profiles, or to enable paving molds with a working width of up to 8 ft 2 in to be mounted between the rear track units
- Crawler Units and Chassis Linkage
- Hydraulically driven track units, 5 ft 1 in long, gear ratio 1:122, including towing device
- Continuously adjustable paving speed from 0 to 49 ft/min
- Continuously adjustable transport speed from 0 to 115 ft/min
- Hydraulic leveling cylinders with a stroke of 4 ft 1 in
- Machine Control, Leveling and Steering
- Digital control system with LCD display providing the operator with all pertinent information and allowing parameter settings, e.g. free choice of languages (D/GB/F/E/NL), to be made via a menu
- Proportional electrohydraulic leveling and steering by means of a PLC system including two leveling sensors, two steering sensors and one slope sensor
- Concrete Equipment for Offset Paving
- The offset paving molds can be mounted on the left or right side of the machine
- Miscellaneous
- Pre-fitting for installing the WITOS FleetView control unit
- European design type certification, EuroTest mark and CE conformity
Standard Equipment, can be replaced with optional equipment if desired
- Crawler Units and Chassis Linkage
- Model with one rigid front track unit connection
- Three track units fitted with triple-grouser steel track pads
- Machine Control, Leveling and Steering
- Sensor mounting brackets, adjustable in height and range
- Vibration
- Hydraulic vibrator drive for up to 5 vibrators
- Two straight vibrators D66, hydraulically driven
- Concrete Feeding System
- Belt conveyor 16 ft 1 in x 2 ft with reversible hydraulic drive, hydraulically adjustable
- Steel chute
- Concrete Equipment for Offset Paving
- Offset mold mount telescoping hydraulically to one side; stroke: 3 ft 7 in
- Offset paving mold up to 2 ft wide, max. height of 15.7 in
- Miscellaneous
- Standard painting in RAL 9001 (cream)
- Lighting system including 3 halogen working lights, 24 V
- Crawler Units and Chassis Linkage
- Model with one pivoting front track unit connection (parallelogram arms)
- Fourth track unit and two pivoting front track unit connections (parallelogram arm)
- Three track units fitted with polyurethane track pads
- Four track units fitted with triple-grouser steel track pads
- Four track units fitted with polyurethane track pads
- Extension element for telescoping device of machine frame, front
- Frame extension elements, rear, for 8 ft 2 in to 12 ft wide paving molds
- Frame extension elements at front, for molds from 8 ft 2 in – 12 ft width
- Frame extension elements, front, for 8 ft 2 in to 12 ft wide paving molds
- Machine Control, Leveling and Steering
- Two slab tracers
- Third height and steering sensor for paving in corners with tight radii
- Pre-fitting for 3D leveling
- Additional slope sensor for 3D leveling
- Laser transmitter for AutoPilot 2.0 including stand
- Laser receiver for AutoPilot 2.0
- Ultrasonic sensor for AutoPilot 2.0
- Total station Leica iCON robot 50 for AutoPilot 2.0
- Additional tablet computer with case for AutoPilot 2.0
- Concrete Spreading Equipment for Slab Paving
- Cross-spreading auger, 8 ft 2 in long, suitable in particular for use with safety barrier molds and trimmer
- Spreading auger 6.00 ft for molds
- Spreading auger – extension element 1.00 ft, right-hand pitch
- Spreading auger – extension element 1.50 ft, right-hand pitch
- Spreading auger – extension element 2.00 ft, right-hand pitch
- Spreading auger – extension element 3.00 ft, right-hand pitch
- Grout box auger without crown – basic width 6.00 ft
- Grout box auger – extension element 1.00 ft
- Grout box auger – extension element 1.50 ft
- Grout box auger – extension element 2.00 ft
- Grout box auger – extension element 3.00 ft
- Vibration
- Electric vibrator drive with 10-kVA generator for up to 5 vibrators
- Hydraulic and electric vibrator drive for up to 5 vibrators
- Two curved vibrators D66, hydraulically driven
- Two straight vibrators D66, electrically driven
- Two curved vibrators (D66), electrically driven
- Hydraulic vibration, addition (5x)
- Electric vibration, addition (5x)
- Straight vibrator D66, hydraulically driven
- Curved vibrator D66, hydraulically driven
- Straight vibrator D66, electrically driven
- Curved vibrator (D66), electrically driven
- Tamper bar with/without crown – basic width 6 ft
- Tamper bar – extension element 1.00 ft
- Tamper bar – extension element 1.50 ft
- Tamper bar – extension element 2.00 ft
- Tamper – extension element 3.00 ft
- Concrete Equipment for Slab Paving
- Paving mold series 1200i – basic width 3.0 ft with ESC
- One-piece sideplate for paving mold series 1200i
- Two-piece sideplate for paving mold series 1200i
- Paving mold series 1200i – extension element 1.0 ft
- Paving mold series 1200i – extension element 1.5 ft
- Paving mold series 1200i – extension element 2.0 ft
- Paving mold series 1200i – extension element 3.0 ft wide
- Configuration with suspension for paving mold with a working width of more than 6.0 ft
- Metering gate for molds 3.00 ft
- Hydraulic height adjustment for metering gate
- Metering gate – extension element 1.00 ft
- Metering gate – extension element 1.50 ft
- Metering gate – extension element 2.00 ft
- Metering gate – extension element 3.00 ft
- Super smoother – basic width 6.0 ft
- Super smoother – extension element 1.00 ft
- Super smoother – extension element 2.00 ft
- Concrete Feeding System
- Belt conveyor 19 ft 4 in x 2 ft with reversible hydraulic drive, hydraulically adjustable
- Belt conveyor 19 ft 8 in x 2 ft, in folding design, with reversible hydraulic drive, hydraulically adjustable
- Charging auger 15 ft 1 in x 15.7 in with reversible hydraulic drive, hydraulically adjustable
- Auger conveyor 18 ft 8 in x 15.7 in with reversible hydraulic drive, hydraulically adjustable
- Steel-rubber chute
- Concrete Equipment for Offset Paving
- Offset mold mount telescoping hydraulically to both sides; stroke: 3 ft 7 in
- Offset paving mold from 2 ft – 3 ft 11 in wide
- Offset paving mold from 3 ft 11 in – 5 ft 11 in wide (max. height of 15.7 in)
- Offset paving mold up to 2 ft 11 in high, max. base width of 2 ft, including hopper
- Offset paving mold up to 4 ft 3 in high, max. base width of 2 ft, including hopper
- Split offset paving mold up to 2 ft wide, max. height of 15.7 in
- Split offset paving mold from 2 ft to 3 ft 11 in wide, max. height of 15.7 in
- Split combined offset mold up to 2 ft 6 in in width and a maximum of 15.7 in in height
- Split combined offset mold up to 3 ft 7 in in width and a maximum of 15.7 in in height
- Version without offset molds
- Split offset paving mold up to 2 ft wide, max. height of 15.7 in
- Split offset paving mold from 2 ft to 3 ft 11 in wide, max height of 15.7 in
- Profile insert for split combined offset mold up to 2 ft 6 in in width
- Profile insert for split combined offset mold up to 3 ft 7 in in width
- Height adapter for split offset paving molds
- Height-adjustable mold mount with 15.7 in lift for split offset mold
- Hydraulic quick-change system for offset paving mold (one-piece mold)
- Additional adapter plate for quick-change system
- Hydraulic quick-change system for offset paving mold (two-piece mold)
- Set of hydraulic components for adjusting the sideplate of an EV offset paving mold
- Set of hydraulic components for adjusting the side header of an AV offset mold
- Offset Trimer
- Preliminary equipment for installing a trimmer
- Trimmer, basic width, 2 ft for mounting on the left side
- Trimmer – extension 8 in wide, for mounting on the left side
- Trimmer – extension 15.7 in wide, for mounting on the left side
- Trimmer, basic width, 2 ft for mounting on the right side
- Trimmer – extension 8 in wide, for mounting on the right side
- Trimmer – extension 15.7 in wide, for mounting on the right side
- Operator’s Platform
- Weather umbrella for operator’s platform
- Weather canopy for operator’s platform, hydraulically telescoping in height
- Miscellaneous
- Painting in one special color (RAL)
- Painting in two special colors (RAL)
- Painting in maximum two special colors with the lower part of the machine painted in special color (RAL)
- High-performance lighting system including 3 LED working lights, 24 V
- Lighting system including 4 halogen working lights, 24 V
- High-performance lighting system including 4 LED working lights, 24 V
- Hydraulic high-pressure water cleaning system with 145 gal plastic tank
- Additional water pump, 24 V
- Additional plastic water tank, 145 gal
- Truck pushing device
- Stringline tensioning system, complete with 3,280 ft 10 in steel wire rope
- Additional tensioning winch for stringline tensioning system
- Stringline tensioning system, complete with 4 x 984 ft nylon rope
- Radius kit, fiberglass rod as stringline replacement for paving in corners with different radii
- Machine commissioning (day rate)
- Export packaging
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.
