Magni TH 5,5.19 P

New Magni Telehandler for Sale

New Magni TH 5,5.19 P Telehandler for Sale

The TH 5,5.19 P is a fixed telescopic handler especially suitable for demanding light industrial sites. Powered by a Deutz 74,4 Kw engine, it can safely reach a height of 18.80 m on rough terrain thanks to its 4-wheel drive and the automatic levelling system, which acts on both the wheels and stabilisers. The hydrostatic transmission offers precision and manoeuvrability.

This machine is compatible with a wide range of attachments. It is equipped with the R.F.ID system which allows for automatic recognition of attachments and the creation of the relative load charts.

This model is equipped with the levelling system on tyres allowing the operator to adjust the inclination of the machine. Thus, the entire load diagram is available for any type of operation, even when under normal conditions the slope of the terrain could affect lifting performance.

  • Lowered design for great stability
  • Available with Deutz Stage V and IIIA engines
  • Available in two engine sizes, 55 kW and 75 kW, to suit your needs
  • Standard pivoting stabilisers for optimised lifting capacities up to 5.5 tonnes
  • 350 bar L/S hydraulic system
  • 4WD
Body
Wheels 4WD – 4WS
Capacity at Maximum Height 6,600 lbs.
Number of Gears 2/2
Dimensions
Length 20’10”
Width 8’1”
Weight 27,950 lbs. (unladen)
Ground Clearance 1’4”
Turning Radius 18’9” (end of forks)
Lifting Height 61’8”
Axle Weight 12,550 lbs. (Front axle unladen boom retracted and lowered)
17,200 lbs. (Rear axle unladen boom retracted and lowered)
Engine
Engine Make Deutz
Engine Model TCD 3,6 L4 Stage V or TCD 3,6 L4 EDG – Stage IIIA
Engine Type Turbocharged direct injection diesel
Cylinders 4 in line
Horsepower 101.20 HP
Cooling Water – intercooler
Max Travel Speed 21 MPH
Fuel Tank Capacity 52.8 Gallons
Steering Frontal/Concentric/Crab
Rated RPM 2200 RPM
Engine Oil Capacity 2.4 Gallons
Coolant Capacity 5.3 Gallons
Working Pressure 350 bar (Load Sensing)
Climate control as standard Yes
Gearbox Dropbox, 2 speeds forward-reverse
Automatic attachment recognition Yes
Drivetrain
Axles Axles with planetary gearboxes
Transmission Type Hydrostatic
Front Axle Oscillating and steering with levelling, +/-8°
Rear Axle Oscillating and steering with hydraulic lock
Engine/Drivetrain
Displacement 0.95 Gallons
Torque 302 lb/ft at 1600 RPM
Hydraulic
Hydraulic Flow 31.7 gpm
Hydraulic Oil Capacity 24.6 Gallons
Hydraulic Movements Control 1 joystick with integrated manoeuvre enable
Circuit Type Load Sensing
Service Pump Variable displacement
Controls for Boom Movements SIL 2 electro-proportional valve
Operational
Brakes Service: Wet multi-disk on front and rear axle
Parking: Hydraulic with negative action on front axle
Tires 445/65 R22.5
Gradeability 55%
Maximum Reach 48’4”
Lift Capacity 12,100 lbs.
Maximum Pressure 480 bar
Application Events and Cinemas, Construction, Logistics
Stabilizers Pivoting
Max. Boom head flow rate 19.8 gpm
  • Special: For each special application Magni has the right solution, that allow you to do the job in complete safety and enhance the machine’s performances.
    • MY MAGNI: The new GPS system that can provide a total overview that enables you to map and track every movement of your fleet, and displays the most critical items on your dashboard. Technical alarms and maintenance data help to keep your fleet running and in perfect condition at all times. Whereas, safety warnings alert you of malfunctions and safety-related defects. MyMagni is available on Desktop, Apple Store and Google Play Store. For the RTH and HTH range, the first three years’ subscription is included in the price of the machine.
    • SPECIAL PAINTING (COMPLETE MACHINE): Option consisting of custom colour for the following machine parts: chassis, stabilisers and cab.
    • SPECIAL PAINTING (REPLACING ONLY MAGNI RED): Option consisting of custom colour for the following machine parts: chassis-turret and boom, and engine compartment/tank.
  • Performance: Everything revolves around excellent performances that make using a Magni a unique experience. An experience where the operator is the center, who will be able to do his best during working hours.
    • 110 V PLUG AT BOOM HEAD: Extension cable provision for connection of  110 V components on the end of the boom.
    • HYDRAULIC OIL HEATER (230V): Option consisting of a 230V plate heating element positioned on the hydraulic oil tank in order to maintain oil viscosity in very cold climates.
    • NORDIC PACKAGE: Option consisting of:
      • heater for engine coolant 230V
    • OPT-02-027
      • hydraulic oil for cold climate
    • OPT-02-025
      • led lights on top of the cab front
    • OPT-02-003
      • led lights on top of the cab rear
    • OPT-02-004
      • led lights on the boom
    • OPT-02-007
      • external battery cut-off
    • OPT-03-003
      • 110/230 V plug in the cabin
  • HYDRAULIC OIL FOR COLD CLIMATES: ISO VG 32 hydraulic oil which provides full performance in very cold climates down to -32°.
  • BIODEGRADABLE HYDRAULIC OIL: High-performance EAL, completely synthetic and zinc free for hydraulic systems. Saturated synthetic ester base. Allows for «lifetime filling» extended oil change intervals, without deposits.
  • HEATER FOR ENGINE COOLANT: Option consisting of an electric engine coolant pre-heating element, perfect for countries with cold climates.
  • Safe & Secure: To be always up to date with the different countries regulations, Magni has a solution for each need.
    • No. 4 AE77 445/65 R22.5 ROAD WHEELS: Robust, durable, safe and reliable even off-road. This Aeolus 445/65R22.5 radial agricultural tyre has a profile depth of 16.5 mm. It is the ideal solution for those who often drive on paved roads and need a more comfortable tyre for long distances. Heavy loads are no problem for the AE77, which ensures maximum performance even on tyres.
    • LIFTING CYLINDER STOP: Safety device for stopping the lifting cylinder.
    • LEFT SPARE WHEEL: Type-approved, pre-assembled left wheel composed of rim and tyre.
      • OPT-03-017 (445/65 R22,5) is compatible with TH range
    • RIGHT SPARE WHEEL: Type-approved, pre-assembled right wheel composed of rim and tyre.
      • OPT-03-016 (445/65 R22,5) is compatible with TH range
    • NO. 4 FOAM FILLED TYRES 445/65 R22,5: This tyre virtually eliminates the risk of damage and blowouts, ensuring the machine remains in full working order and guaranteeing the highest levels of safety during all demanding uses. It is filled with a polyurethane foam which undergoes a chemical reaction and solidifies in 24 hours. The result is an elastomer which will not extrude either from cuts or holes, yet allows the tyre to deflect like a corresponding air-filled model.
      • The speed of the machine will be reduced for safety reasons with this option. The following kit is a replacement for the standard wheels.
    • ANTISPARK SYSTEM (ANTISPARK + VALVE ON THE ENGINE): The engine is fitted with devices to prevent any sparks from exiting from the exhaust system, reducing greately the risk for fire and explosions.
    • EMERGENCY STOP BUTTONS: Option composed by 2 external buttons for the complete shut off of the machine mounted on the lateral sides of the chassis.
  • Comfort: Magni gives full attention to operator comfort. Small details are the proof that Magni put all its efforts into having the maximum results of care and construction precision.
    • AIR SUSPENDED SEAT WITH HEATING 24V: The air suspension seat absorbs the majority of the machine’s dynamic  oscillations during movement, making driving more comfortable. Option that increases seat comfort and user wellbeing on cold days. The seat is equipped with a 24V heating system. The heat is gradually reduced automatically, and when the lowest level is reached, the seat heating system is switched off automatically. It is also possible to disable the system manually at any time.
    • HEATED SEAT 24V: This option increases seat comfort and user well-being on cold days. The seat is equipped with a 24V heating system. The heat is gradually reduced automatically, and when the lowest level is reached, the seat heating system is switched off automatically. It is also possible to disable the system manually at any time.
    • RADIO DAB: The digital radio expands the features of the vehicle radio by incorporating a Digital Receiver which receives DAB and DAB+ terrestrial radio broadcasts. The advantages of digital radio include an enormous range of channels and impressive sound quality. As digital broadcasts are not yet available in all areas, DAB reception will automatically switch between digital and analogue reception depending on the signal strength. Integrated Bluetooth connection.
    • ROLL-UP SUNBLIND: Option consisting of roll-up sun shades which protect the cab from UV rays and make the operator’s work more comfortable and, above all, safer. Manually operated, without guide rods and pull rod stopping with hooks.

All machines are not available at all locations.

View Brochure

Main Technical Specifications
MAKE Magni
MODEL TH 5,5.19 P

Why rent when you can own?

Call us to see if ownership makes economical sense for you and your organization.

Magni TH 5,5.19 P

print
6715 W. Reno
Oklahoma City, OK 73127 Phone: 888.861.0219
www.kirby-smith.com
CUSTOMER
DATE
PRICE
SALESPERSON

New Magni TH 5,5.19 P Telehandler for Sale

The TH 5,5.19 P is a fixed telescopic handler especially suitable for demanding light industrial sites. Powered by a Deutz 74,4 Kw engine, it can safely reach a height of 18.80 m on rough terrain thanks to its 4-wheel drive and the automatic levelling system, which acts on both the wheels and stabilisers. The hydrostatic transmission offers precision and manoeuvrability.

This machine is compatible with a wide range of attachments. It is equipped with the R.F.ID system which allows for automatic recognition of attachments and the creation of the relative load charts.

This model is equipped with the levelling system on tyres allowing the operator to adjust the inclination of the machine. Thus, the entire load diagram is available for any type of operation, even when under normal conditions the slope of the terrain could affect lifting performance.

  • Lowered design for great stability
  • Available with Deutz Stage V and IIIA engines
  • Available in two engine sizes, 55 kW and 75 kW, to suit your needs
  • Standard pivoting stabilisers for optimised lifting capacities up to 5.5 tonnes
  • 350 bar L/S hydraulic system
  • 4WD
GENERAL INFORMATION
Manufacturer
Magni
Model Year
Model
TH 5,5.19 P
Condition
NEW
Body
Wheels
4WD – 4WS
Capacity at Maximum Height
6,600 lbs.
Number of Gears
2/2
Dimensions
Length
20’10”
Width
8’1”
Weight
27,950 lbs. (unladen)
Ground Clearance
1’4”
Turning Radius
18’9” (end of forks)
Lifting Height
61’8”
Axle Weight
12,550 lbs. (Front axle unladen boom retracted and lowered) 17,200 lbs. (Rear axle unladen boom retracted and lowered)
Engine
Engine Make
Deutz
Engine Model
TCD 3,6 L4 Stage V or TCD 3,6 L4 EDG – Stage IIIA
Engine Type
Turbocharged direct injection diesel
Cylinders
4 in line
Horsepower
101.20 HP
Cooling
Water – intercooler
Max Travel Speed
21 MPH
Fuel Tank Capacity
52.8 Gallons
Steering
Frontal/Concentric/Crab
Rated RPM
2200 RPM
Engine Oil Capacity
2.4 Gallons
Coolant Capacity
5.3 Gallons
Working Pressure
350 bar (Load Sensing)
Climate control as standard
Yes
Gearbox
Dropbox, 2 speeds forward-reverse
Automatic attachment recognition
Yes
Drivetrain
Axles
Axles with planetary gearboxes
Transmission Type
Hydrostatic
Front Axle
Oscillating and steering with levelling, +/-8°
Rear Axle
Oscillating and steering with hydraulic lock
Engine/Drivetrain
Displacement
0.95 Gallons
Torque
302 lb/ft at 1600 RPM
Hydraulic
Hydraulic Flow
31.7 gpm
Hydraulic Oil Capacity
24.6 Gallons
Hydraulic Movements Control
1 joystick with integrated manoeuvre enable
Circuit Type
Load Sensing
Service Pump
Variable displacement
Controls for Boom Movements
SIL 2 electro-proportional valve
Operational
Brakes
Service: Wet multi-disk on front and rear axle Parking: Hydraulic with negative action on front axle
Tires
445/65 R22.5
Gradeability
55%
Maximum Reach
48’4”
Lift Capacity
12,100 lbs.
Maximum Pressure
480 bar
Application
Events and Cinemas, Construction, Logistics
Stabilizers
Pivoting
Max. Boom head flow rate
19.8 gpm

Legal Notice: Manufacturer Name, Logo and Model Information are Registered Trademarks of the Manufacturer.
Specifications and other information are subject to change without notice. No representation of accuracy is made.
Image is believed to be in the public domain or used with permission.
All machines are not available at all locations.
LOCATIONS
CAREERS
CONTACT